RMS900-106078 | Kit Generator Stator + Voltage Regulator Rectifier for Yamaha YFM 700 / YFM 700R Raptor 2006-2018 |
C$427.78
Stator Dimensions
Interior diameter: 42 mm
Exterior diameter: 107 mm
Thickness: 18 mm
Length of wires stator to grommet: 120 mm
Length of wires grommet to plug: 200 mm
Length of pickup coil’s wire to grommet: 75 mm
Other specifications :
Number of wires: 5
Number of plugs: 2
Number of pins: 5
Wire-to-wire resistance :
Alternator : White to White = 0.8 ohms +-20%
Pickup: Blue/White to White/Green = 250 ohms +-20%
Regulator Dimensions
Width: 89 mm
Length: 91 mm
Height: 27 mm
Fixation holes center to center: 65 mm
Other specifications :
Number of plugs: 1
Number of pins: 6
Brand new Kit Generator Stator + Voltage Regulator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
Generator Stator
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
Regulator
- No assembly required
- Higher grade of electric components
- Improved heat sink and charging capabilities
- The quality exceeds the OEM equipment
- We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Stator
Before installing your new stator:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Regulator
Before installing your new regulator/rectifier:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
| Weight | 1.18 kg |
|---|---|
| Dimensions | 16.002 × 7.112 × 16.00 cm |
| Brand |
RMSTATOR |
| Fitment Type |
Guaranteed Fit |
OEM AND OTHER PART NUMBER
OEM NUMBER
- 106078-R00, 106078.R00, 106078 R00, 106078R00
ADDITIONAL NUMBER
- RMS900-106078
DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS
We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.
GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.
We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
WE ALL ARE CUSTOMERS ELSEWHERE.
In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.
OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS
We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.
