Brand new Kit Lighting Stator + AC Voltage Regulator Rectifier
- All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part
- All products shipped are tested
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Rubber grommet included
Heavy Duty AC Voltage Regulator Rectifier
- 12 Volts regulator used by Baja winners
- Heavy duty and improved regulator rectifier
- For use with all standard halogen and quartz lights
- Precise voltage control, eliminates light burnout
- Reduce flickering and dimming
- Simple installation
- Works with all other OEM part
- Rated at 225 watts
Before installing your new Stator:
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Before installing your new Voltage Regulator Rectifier:
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010″.
To add headlights to your vehicle:
- The stator includes a 100 watts lighting coil between the yellow wire and the ground
- Ground the black wire from the regulator to the frame
- Connect both yellow wires from the regulator and the lights to the yellow wire from the stator
- Ground the other side of your lights to the frame to complete the circuit
