TSK-800 | Ski-Doo Belt Adjuster Kit with Tools

The distance between the sheaves of your primary (drive) Clutch and the drive belt is very critical for Proper CVT transmission performance. The side gap, or belt-to-sheave clearance, is critical to having the entire drive system start out in the Proper shift ratio. This is especially critical in high-load situations, like deep or wet snow, or when you want the best acceleration.

The new TRA Belt Adjuster Kit from Thunder Products allows you to get your belt to sheave clearance down to .010 to .015 like it should be. Most sleds are not even close to this — in fact, a side clearance of .080 to .090 is not uncommon. Eliminating the heat caused by belt slippage imProves traction on the Clutch sheaves and Extends belt life.

The TRA Belt Adjuster allows you to make necessary adjustments to the side clearance without pulling the Clutch off. Only the Clutch cover needs to be removed. No machining is necessary. The smooth engagement will let you get on top of the snow and go!