Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- All products shipped are tested
THIS STATOR DOES NOT FIT THE 1999 MODEL.
Please compare your original part to the picture, all our pictures are accurate. If in doubt, please email us
*Please compare the connectors of your stator with those of our product before buying because there are two possible stators for the Ski-Doo Grand Touring 700 1998.
*All item pictures are accurate; please compare our item to your original part, what you see in the picture is what will be shipped.
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010″.
