RM22612 | Generator Stator + Gasket for Yamaha WR 250 R 2008-2020 / WR250X 2008-2011 | 3D7-81410-00-00 / 3D7-81410-01-00 |
C$253.48
Dimensions Stator:
Interior diameter : 35mm
Exterior diameter : 98mm
Thickness : 15mm
Length of wires stator to grommet : 140mm
Length of wires grommet to plug : 400mm
Length of pickup coil’s wire to grommet : 85mm
Other specifications :
Number of wires : 7
Number of plugs : 3
Number of pins : 9
Wire to wire resistance :
Alternator : White between each White = 0.4ohms +/-20%
Pickup : Pink to White = 265ohms +/-20%
Brand New Yamaha Recall Kit Stator + Bolt Set + Stator Crankcase Cover Gasket
Recall on your stator?
Going to the dealership to get your recall taken care of means your bike won’t be available for 3 weeks.
When you need your bike ready yesterday, look for other options.
We will ship your part fast enough for you to receive it as soon as tomorrow, so you can have it installed immediately.
With so many OEM recalls these days, riders are ripe for reliable parts.
With over 20 years of specializing in rebuilding and manufacturing stators, we give a reliable alternative to the not always reliable OEM parts.
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Brand new stator
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet includedBefore installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.bolt set
- All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
| Weight | 0.93 kg |
|---|---|
| Dimensions | 16.01 × 7.11 × 16.00 cm |
| Brand |
RMSTATOR |
| Fitment Type |
Guaranteed Fit |
OEM AND OTHER PART NUMBERS
OEM NUMBER
- RM22612-R00, RM22612R00, RM22612.R00, RM22612 R00
ADDITIONAL NUMBER
- RM22612
DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS
We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.
GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.
We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
WE ALL ARE CUSTOMERS ELSEWHERE.
In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.
OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS
We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.
