Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- Charging capabilities
- The quality exceeds the OEM equipment
- All products shipped are tested
Before installing your new voltage regulator rectifier:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Please Note: This unit replaces BOTH your original separate regulator and rectifier. Both original parts will need to be unplugged and removed. It will require a new mounting location, bracket, or hardware as it is not a direct fit for the OEM mounting location of either original part.
To connect:
- The PINK wire from the stator goes to either regulator YELLOW wire.
- The YELLOW wire from the stator goes to the other regulator YELLOW wire.
- The RED/WHITE wire from the bike’s harness goes to the regulator RED wire.
- The GREEN wire from the bike’s harness goes to the regulator GREEN wire.
Please insulate and secure the other unused wires from removing the original components.
