RM30T12 | Voltage Regulator Rectifier for Polaris Sportsman 500 Worker 500 Scramber 500 Magnum 500 1997-2003 |

C$87.89

Dimensions :

Thickness : 19mm
Length : 64mm
Height: 74mm
Fixation holes center to center : 18mm
Wires length: 120mm

 

Other specifications :

Number of plugs : 4
Number of pins : 4
Minimum Charging Voltage: 13V +/- 0.5V
Maximum Charging Current: 6A-10A/50W-200W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰

   

Available on backorder

   
SKU: RM30T12 Categories: ,
Description

Brand new improved voltage regulator rectifier

This product is a high quality voltage regulator rectifier includes the latest generation of our voltage regulation circuit to replace the unreliable OEM voltage regulator rectifier on various Polaris models. You can now count on a steady output voltage to send the right charge rate to the battery either at low or high RPMs.

  • AC regulator rectifier
  • Superior to the OEM unit, generate less heat
  • For use with all standard halogen and quartz lights.
  • Precise voltage control eliminates light burnout.
  • Reduce flickering and dimming.
  • Connector included
  • Simple installation, direct replacement
  • Works with all other OEM part
  • All products are tested before they are shipped.

Even if the central aluminium core heat sink provide great heat dissipation, we recommend that you install the regulator on a very clean surface and that you bolt it tightly on the frame to ensure the natural heat dissipation through the metallic chassis.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Before installing your new voltage regulator rectifier;

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Please Note: Our Polaris regulator fits correctly for the listed model/year applications. However you may notice we use a slightly different wire color on our regulator compared to some OEM parts, specifically for YELLOW wires. Please refer to the wire color and function notes for our regulator below.

Red wire:
Battery positive output. This is the same as the RED wire on OEM regulators.

BROWN wire (or metal mounting bracket if no BROWN wire):
Battery negative (ground) output. This is the same as the BROWN wire on OEM regulators. If there is no BROWN wire, the metal mounting bracket of the regulator is the ground.

Any wire with YELLOW, regardless of stripe color:
Stator AC input. All wires with any YELLOW, regardless of a stripe color, are equivalent, interchangeable, and have no polarity. However, most OEM regulators have equivalent YELLOW, YELLOW/RED, and YELLOW/BROWN or YELLOW/BLACK wires. Our regulator will usually have similar colored YELLOW wires with stripes to generally match the OEM. Keep in mind the YELLOW wires can be installed in any order to connect with YELLOW wires on the vehicle.

Additional information
Weight 0.15 kg
Dimensions 7.112 × 5.588 × 5.08 cm
Brand

RMSTATOR

Fitment Type

Guaranteed Fit

OEM AND OTHER PART NUMBER

OEM AND OTHER PART NUMBER

OEM NUMBER

  • 220-3636, 220.3636, 220 3636, 2203636
  • 406-0173, 406.0173, 406 0173, 4060173
  • 401-0657, 401.0657, 401 0657, 4010657
  • 401-3954, 401.3954, 401 3954, 4013954

ADDITIONAL NUMBER

  • RM30T12
About brand

DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS

We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.

GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.

We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.

WE ALL ARE CUSTOMERS ELSEWHERE.

In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.

OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS

We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.

 

 

 

 

 

 

 

 

 

 

 

 

Ride Fitment
Type Year Make Model
Type Year Make Model
fitments are loading..