RMS900-106169 | Kit Stator + Voltage Regulator for Polaris Ranger / Ranger Crew / RZR 4 / RZR 800 2011-2017 | # 4011982 4014034 4012941 |

C$436.78

Battery condition is extremely important. No stator, nor regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Stator Dimensions
Interior diameter : 40 mm
Exterior diameter : 106 mm
Thickness : 24 mm
Length of wires stator to grommet : 45 mm
Length of wires grommet to plug : 100 mm

Other specifications :
Number of wires : 4
Number of plugs : 1
Number of pins : 4

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%

Voltage regulator rectifier Dimensions
Width : 30 mm
Length : 95 mm
Height: 110 mm
Fixation holes center to center :78 mm

Other specifications :
Number of plugs : 2
Number of pins : 5

   

Available on backorder

   
Description

Brand new aftermarket Stator + Voltage regulator rectifier Kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • No assembly required
  • All products shipped are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Stator

  • Highest grade of of copper winding, resistant to 200 degrees Celsius
  • Rubber grommet included

Voltage regulator rectifier

  • Improved heat sink and charging capabilities
  • The quality exceeds the OEM equipment

We have even included the opposite connector (main harness side) as we know these are often melted corroded defective and a major cause for repetitive electrical issues.

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010″.

Before installing your new voltage regulator rectifier;

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

You will notice that upon installing the voltage regulator rectifier, it is a tight fit.

Additional information
Weight 1.59 kg
Dimensions 33.02 × 5.08 × 22.86 cm
Brand

RMSTATOR

Fitment Type

Guaranteed Fit

OEM AND OTHER PART NUMBER

OEM AND OTHER PART NUMBER

OEM NUMBER

  • 106169-R00 106169.R00, 106169 R00, 106169R00

ADDITIONAL NUMBER

  • RMS900-106169
About brand

DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS

We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.

GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.

We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.

WE ALL ARE CUSTOMERS ELSEWHERE.

In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.

OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS

We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.