RM00034 | Stator Ignition Source Coil for Kawasaki KX 125 / 250 1992-1997 | Yamaha YZ 125 1992-1995 | # 4DB-85510-00-00 21003-1237 |
C$38.79
Big Coil : Between each leg = 323 ohms+/-20%
Small Coil : Between each leg = 20 ohms+/-20%
Brand new ignition source coil
- We offer a brand new ignition source coil for you to repair your stator.
- Often unavailable from the OEM manufacture
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees celsius
- Works with all other OEM parts
- All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
KawasakiI 1992-1997 KX125, 1992-97 KX250
- Take the ignition cover off.
- Take note of the wire colors of the original stator wires and disconnect them from the wiring loom.
- Remove the flywheel using a proper puller tool.
- Remove the baseplate with the original stator.
- Remove the screws that secure the ignition coils and take the coils off.
- Cut the original wires close to the original coils. Take a good look at how the wires are connected to the coil.
Connections:
Large coil connects to the Black/Red and the Red wire.
Small coil connects over to the large coils Red wire and the other side to the White wire.
Connect the wires on the same side of the coils as the original setup.
- Connect the old wires up to the new coils. Put the wires in exactly the same place as on the original. Make sure you have good connections here
- Mount the coils onto the baseplate, fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY!
- Refit the stator baseplate. Ensure the wires CANNOT TOUCH THE FLYWHEEL! (especially on the inside of.
Yamaha YZ125 1992
- Take the ignition cover off.
- Take note of the wire colors of the original stator wires and disconnect them from the wiring loom.
- Remove the flywheel using a proper puller tool.
- Remove the baseplate with the original stator.
- Remove the screws that secure the ignition coils and take the coils off.
- Cut the original wires close to the original coils. Take a good look at how the wires are connected to the coil.
CONNECTIONS:
Large coil connects to the Brown wire, connect the other side up to the Red wire.
Small coil connects to the Black wire (=ground), connect the other side up to the White wire.
- Connect the old wires up to the new coils. Put the wires in exactly the same place as on the original.
- Make sure you have good connections here.
- Mount the coils onto the baseplate, fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY!
- Refit the stator baseplate. Ensure the wires CANNOTTOUCH THE FLYWHEEL! (especially on the inside of the flywheel)
- Refit the flywheel. Tighten the bolt to specified torque.
- Connect the wires to the wiring loom on the bike. Refit the ignition cover.
- Connect the wires to the wiring loom on the bike.
- Fill the ignition cover
| Weight | 0.15 kg |
|---|---|
| Dimensions | 16.01 × 7.11 × 16.01 cm |
| Brand |
RMSTATOR |
| Fitment Type |
Guaranteed Fit |
OEM AND OTHER PART NUMBERS
OEM NUMBERS
- 21003-1236, 21003.1236, 21003 1236, 210031236
- 21003-1237, 21003.1237, 21003 1237, 210031237
- 21003-1259, 21003.1259, 21003 1259 ,210031259
- 21003-1260, 21003.1260, 21003 1260, 210031260
- 21003-1264, 21003.1264, 21003 1264, 210031264
- 21003-1266,21003.1266, 21003 1266 210031266
- 21003-1281, 21003.1281, 21003 1281, 210031281
- 21003-1282, 21003.1282 ,21003 1282 ,210031282
- 21003-1293, 21003.1293, 21003 1293, 210031293
- 21003-1294, 21003.1294, 21003 1294 ,210031294
- 21003-1311, 21003.1311, 21003 1311, 210031311
- 4DB-85510-00-00, 4DB.85510.00.00, 4DB 85510 00 00, 4DB855100000
- 4EX-85510-00-00,4EX.85510.00.00, 4EX 85510 00 00 4EX855100000
- 4JY-85510-00-00,4JY.85510.00.00, 4JY 85510 00 00 , 4JY855100000
ADDITIONAL NUMBER
- RM00034
DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS
We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.
GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.
We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
WE ALL ARE CUSTOMERS ELSEWHERE.
In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.
OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS
We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.
| Type | Year | Make | Model |
|---|---|---|---|
| Type | Year | Make | Model |
| fitments are loading.. | |||
