RM02172 | PeakRPM CDI Box for Polaris Predator 50 Scrambler 50 2003-2006 | OEM# 0451021 |
C$147.89
Dimensions:
Height: 25 mm
Length: 65 mm
Width: 55 mm
Other specifications:
Number of plugs: 1
Number of pins: 5
Please note that: The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.
Available on backorder
Brand new aftermarket CDI box
- Our PeakRPM CDI Box provides the optimal output for your ride
- Enjoy fast & easy installation with our plug & play OEM design and included dielectric connector grease
- OEM-grade electronic components and printed circuit boards for long-term reliability and performance
- 90% of ignition issues are caused by a faulty stator. Fully test ignition components before buying
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Warning: If your electronic box does not have a blue wire, you can simply tape it to your new RMSTATOR box. This blue wire serves as the reverse speed controller. If the electronics box has this wire, be sure to secure it to the wiring harness.
After installation, if the vehicle has difficulty reaching high rpm, disable the cruise control by removing the bridge between the two screws on the back of the electronic box.< /p>
*We suggest that you always take pictures of your original electronics box and wiring before disassembling anything. This way you can refer to it when reinstalling the part and plugging in your new electronic box.
- Our CDI may use a different wire color code then your original.
- All of the wires are installed in the correct order; please do not change any of the wiring configurations.
- This CDI is designed as a direct plug-in replacement and should be used as such.
* Please note : If your OEM CDI box does not have a blue wire, simply tape it to hold it in place. The purpose of this blue wire is to limit the speed of the the vehicle when in reverse. If the OEM CDI has this wire, you will need to install it as the original one was.
If you come across an issue in which the vehicle is not going fast enough (high revolutions), disable the speed control & remove the bridge clip between the 2 screws on the back of the CDI unit.
We always suggest taking photos of your OEM parts before uninstalling them so that you may install your parts in the same fashion.
| Weight | 0.15 kg |
|---|---|
| Dimensions | 9.906 × 4.064 × 9.91 cm |
| Brand |
RMSTATOR |
| Fitment Type |
Guaranteed Fit |
OEM AND OTHER PART NUMBERS
OEM NUMBER
- 0451-021, 0451.021, 0451 021, 0451021
ADDITIONAL NUMBER
- RM02172
DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS
We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.
GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.
We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
WE ALL ARE CUSTOMERS ELSEWHERE.
In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.
OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS
We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.
