Brand New Kit Stator + External Ignition Coil + Flywheel + Flywheel Puller
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
*All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.
High Output Stator
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Adjustable timing plate to advance and retard up to 10 degrees included
External Ignition Coil
- Highest grade of lamination materials
- Spark plug cap(s) included
Improved Stronger Magneto Flywheel Rotor
RMSTATOR is offering a new replacement flywheel with stronger magnetsfor your Banshee. This flywheel can be used as a direct replacement to the OEM.
We suggest combining it to our 100 or 200 watt stator as it will run the lights better in the lower rpm’s.
Stator/Flywheel
Before installing your new stator :
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Before attempting to start your YAMAHA BANSHEE:
This stator is designed as a direct plug-in replacement and should be used as such.Our stator may use a different wire color code then youﾒre original. All of the wires are installed in the correct order; please do not change any of the wiring configurations.When bolting stator in, always use locking compound.Adjusting the air gap is necessary, rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010ﾒﾒ.Set adjustable timing plate at zero for stock timing
External Ignition Coil:
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.
