RM22978 | Kit Stator +PeakRPM CDI Box + Ext. Ignition Coil for Ski-Doo Alpine Formula MX / Plus Nordik Safari 1988-90 | 410912500 |

C$506.37

Stator:
Dimensions :
Interior diameter : 43 mm
Exterior diameter : 108 mm
Thickness : 18 mm
Length of wires : 200 mm

Wire to wire resistance :
Alternator : Yellow To Yellow/Brown = 0.4 ohms +/-20%
Source : Black to Black/Red = 78 ohms +/-20%

High performance CDI Box
The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

   

Available on backorder

   
SKU: RM22978 Categories: , ,
Description

Brand New Kit Stator + PeakRPM CDI Box + External Ignition Coil

  • The Quality exceeds the OEM equipment
  • All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Connector included
  • Back Plate included

Brand new PeakRPM CDI Box

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Higher grade of electronic components

Brand new external ignition coil

  • You must re-install your OEM spark plug cap(s)
  • Once your OEM spark plug cap(s) are re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install
  • Highest grade of lamination materials

Before installing your new stator

 

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

 

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Before installing your new CDI box

Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Before installing your new external ignition coil

  • Remove spark plug cap(s) from your OEM external ignition coil.
  • Screw cap(s) on the new external ignition coil.

Remove the yellow wire from external the ignition coil, if it is not applicable to your model.

Additional information
Weight 2.15 kg
Dimensions 33.02 × 22.86 × 5.08 cm
Brand

RMSTATOR

Fitment Type

Guaranteed Fit

OEM AND OTHER PART NUMBER

OEM AND OTHER PART NUMBER

OEM NUMBER

  • RM22978-R00, RM22978 R00, RM22978.R00, RM22978 R00

ADDITIONAL NUMBER

  • RM22978
About brand

DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS

We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.

GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.

We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.

WE ALL ARE CUSTOMERS ELSEWHERE.

In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.

OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS

We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.