RM22955 | Kit Stator + Regulator Rectifier for Yamaha YFZ 350 Banshee 1995-2006 |
C$147.89
Stator
Number of wires : 6
Number of terminals : 6
Alternator : Yellow to Black = 0.4 ohms+/-20%
Pick up 1 : White/Green to White/Red = 115 ohms+/-20%
Source 1 = Green to Red 12 ohms+/-20%
Interior Diameter: 34mm
Exterior Diameter: 103mm
Thickness: ﾠ27mm
Regulator rectifier
Number of wires : 4
Number of terminals : 4
Bracket center to center: 55 mm
Thickness: 22 mm
Height: 56 mm
Brand new HO Stator + Voltage Regulator Rectifier Kit 200 watts
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
High output stator 200 watts
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Adjustable timing plate to advance and retard up to 10 degrees included
Voltage regulator rectifier
- 12 volt regulator used by Baja winners
- Rated at 225 watts
- The Quality exceeds the OEM equipment
- Precise voltage control, eliminates light burnout
- Reduce flickering and dimming
- Improved heat sink and charging capabilities
- Higher grade of electric components
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010″.
Before installing your new regulator/rectifier:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
| Weight | 1.20 kg |
|---|---|
| Dimensions | 16.51 × 15.875 × 6.99 cm |
| Brand |
RMSTATOR |
| Fitment Type |
Guaranteed Fit |
OEM AND OTHER PART NUMBERS
OEM NUMBER
- 3GG-85510-00-00, 3GG.85510.00.00, 3GG 85510 00 00, 3GG855100000
- 3GG-85510-01-00, 3GG.85510.01.00, 3GG 85510 01 00, 3GG855100100
ADDITIONAL NUMBER
- RM22955
DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS
We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.
GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.
We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
WE ALL ARE CUSTOMERS ELSEWHERE.
In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.
OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS
We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.
