RMS900-105940 | CDI Box Calibrated Module + Stator for Ski-Doo Tundra 280 R 1998 2000 2002-2005 |

C$785.78

CDI Dimensions
Height: 44 mm
Length: 94 mm
Width: 48 mm
Fixation holes center to center: 72 mm

Other specifications:
Number of plugs: 3
Number of pins: 9

Please note that: The only real way to test your CDI box is to swap it out with another known good unit from the same year / make / model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

Stator Dimensions
Interior diameter : 43 mm
Exterior diameter : 110 mm
Thickness : 32 mm
Length of wires clamp to plug : 500 mm

Other specifications :
Number of wires : 6
Number of plugs : 1
Number of pins : 6
Number of poles : 12

Wire to wire resistance :
Alternator : Between each yellow = 0.4 ohms +-20%
Source : Red to Black = 8 ohms +-20%

   
   
SKU: RMS900-105940 Categories: , ,
Description

Brand New aftermarket CDI Box + Stator Kit

Brand new aftermarket CDI box

  • Our PeakRPM CDI Box provides the optimal output for your ride
  • Enjoy fast & easy installation with our plug & play design and included dielectric connector grease
  • OEM-grade electronic components and printed circuit boards for long-term reliability and performance
  • 90% of ignition issues are caused by a faulty stator. Fully test ignition components before buying

All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Connector included
  • Back Plate included
  • All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

CDI

Our CDI might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Before installing your new Stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010″.

Additional information
Weight 1.38 kg
Brand

RMSTATOR

Fitment Type

Guaranteed Fit

OEM AND OTHER PART NUMBER

OEM AND OTHER PART NUMBER

OEM NUMBER

  • 105940R00, 105940-R00, 105940.R00, 105940 R00

ADDITIONAL NUMBER

  • RMS900-105940
About brand

DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS

We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.

GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.

We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.

WE ALL ARE CUSTOMERS ELSEWHERE.

In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.

OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS

We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.