RMS900-107872 | High Output Stator and Flywheel for Yamaha YFS 200 Blaster 1988-2006 OEM Repl. # 5VM-85560-00-00 2XJ-85560-M1-00 |
C$220.88
Stator
Dimensions:
Interior diameter: 27 mm
Exterior diameter: 79 mm
Thickness: 13 mm
Length of wires stator to grommet: 80 mm
Length of wires grommet to plug: 450 mm
Other specifications:
Number of wires: 5
Number of plugs: 5
Number of pins: 5
Number of poles: 2
Wire to wire resistance:
Alternator: Yellow/Red to Black = 0.6 ohms +-20%
Black Wire is Grounded
Pickup: White/Red to Black = 24 ohms +-20%
Source: Black/Red to Green/White = 230 ohms +-20%
Magneto Flywheel Rotor
Dimensions:
Exterior Diameter: 118 mm
Interior Diameter: 84.5 mm
Interior Diameter Center Housing: 19 mm
Exterior Diameter Center Housing: 26 mm
Thickness (exterior): 45 mm
Thickness (interior): 40 mm
Brand new Kit Magneto Flywheel + Stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
Brand new stator
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Connector, pick up pulsar coil, rubber grommet included
Magneto Flywheel Rotor
Brand new Magneto Flywheel Rotor
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Before attempting to start your Yamaha, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010″.
Before installing your new Stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
| Weight | 1.81 kg |
|---|---|
| Brand |
RMSTATOR |
| Fitment Type |
Guaranteed Fit |
OEM AND OTHER PART NUMBERS
OEM NUMBER
- 107872-R00, 107872.R00, 107872 R00, 107872R00
ADDITIONAL NUMBER
- RMS900-107872
DO NOT MANUFACTURE PARTS, DESIGN PERMANENT SOLUTIONS
We cultivate our actions towards finding permanent solutions. There is no way, us, as customers, would like to replace a part again and again. This mindset forces our team to design to fix, to conquer these pesky electrical failures in powersport.
GOOD DESIGN PRODUCE GOOD PRODUCTS. EFFICIENT DESIGN CREATES STELLAR PRODUCTS.
We are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
WE ALL ARE CUSTOMERS ELSEWHERE.
In our shopping journey for buying our daily goods, we all expect to be treated with respect in a relation that makes us feel welcomed. Our team is encouraged to elevate that standard even higher and to provide all the information necessary for an easy and reliable installation.
OWN YOUR CUSTOMER PAIN LIKE IT IS YOURS
We own powersport rides ourselves. We feel the pain of dealing with unsolvable troubleshooting on our rides. We are committed in manufacturing complete solutions to known or I-would-never-have-suspected issues that are plaguing your rides... and ours.
